SAE/AISI 1060 Round Bar (UNS G10600)
SAE/AISI 1060 Round Bar is a high-carbon steel containing approximately 0.60% carbon, offering high strength, excellent hardness, and superior wear resistance compared to medium-carbon grades. This steel responds very well to heat treatment and is commonly supplied in annealed, normalized, or quenched & tempered conditions for demanding mechanical and industrial applications.
Key Features
- High carbon content for increased strength and hardness
- Excellent response to quenching and tempering
- High wear and abrasion resistance
- Good toughness after proper heat treatment
- Suitable for induction and flame hardening
Equivalent Grades
| Standard | Equivalent Grade |
|---|---|
| DIN | C60 / 1.0601 |
| EN | EN9 |
| JIS | S60C |
| IS | IS 1570 Gr. 60C8 |
Sizes
- Diameter: 6 mm to 450 mm
- Length: 3 m, 6 m, or cut-to-length
- Custom sizes available on request
AISI 1060 Round Bar Chemical Composition
| Element | Percentage (%) |
|---|---|
| Carbon (C) | 0.55 – 0.65 |
| Manganese (Mn) | 0.60 – 0.90 |
| Phosphorus (P) | ≤ 0.040 |
| Sulfur (S) | ≤ 0.050 |
| Iron (Fe) | Balance |
SAE 1060 Mechanical Properties
| Property | Value |
|---|---|
| Tensile Strength | 750 – 1000 MPa |
| Yield Strength | ~370 MPa |
| Elongation | 10 – 14% |
| Hardness (Annealed) | ~180 HB |
| Hardness (Q&T) | Up to 55 HRC |
UNS G10600 Physical Properties
| Property | Value |
|---|---|
| Density | 7.85 g/cm³ |
| Melting Point | ~1460°C |
| Thermal Conductivity | 49.0 W/m·K |
| Modulus of Elasticity | 205 GPa |
Types of SAE/AISI 1060 Round Bar
- Hot Rolled Round Bar
- Cold Drawn Round Bar
- Bright Round Bar
- Turned & Polished Round Bar
- Quenched & Tempered Round Bar
Applications
- Springs and high-strength shafts
- Gears, axles, and spindles
- Agricultural and mining equipment parts
- Forged components
- Wear-resistant machine parts
- Induction-hardened components
Reviews
There are no reviews yet.